- The equilibrium price and quantity is $30 and 40 tonnes.
- Consumer surplus, Producer surplus and total surplus is $600, $600 and $1200 respectively.
- If a dictator bans broccoli, the burden on broccoli sellers (producers) will be more.
a. To graph the supply and demand curves, we need to plot the quantity (Q) on the horizontal axis and the price (P) on the vertical axis.
Supply: Qs = 4P - 80
Demand: QD = 100 - 2P
4P - 80 = 100 - 2P
6P = 180
P = 30
We can substitute the equilibrium price (P = 30) into equation:
Qs = 4P - 80
= 4(30) - 80
= 120 - 80
= 40
The equilibrium price is $30 per bushel, and the equilibrium quantity is 40 tonnes.
b. Consumer Surplus:
= 0.5 * (QD at equilibrium) * (Equilibrium Price - Lowest Price)
= 0.5 * (40) * (30 - 0)
= $600
Producer Surplus:
= 0.5 * (Qs at equilibrium) * (Highest Price - Equilibrium Price)
= 0.5 * (40) * (30 - 0)
= $600
Total Surplus = Consumer Surplus + Producer Surplus
= $600 + $600
= $1,200
c. If a dictator bans broccoli, the burden on broccoli sellers (producers) will be even greater. If you ban broccoli, there will be no supply of broccoli, and the supply will be zero. Broccoli can no longer be purchased by shoppers, but can be substituted with other vegetables. On the other hand, sellers will lose the entire market for broccoli, resulting in a complete loss of producer surplus. This scenario therefore places a greater burden on the seller.
To learn more about Consumer surplus:
https://brainly.com/question/32148111
#SPJ4
When the price of poke bowis is $7.9, Professor Roberts buys an average of 4.6 bowis per week and when the price of poke bowis is $11.8 he buys an average of 2.5 per week. Using the midpoint method, Professor Roberts' elasticity of demand is (NOTE: do not include a minus "." sign in your answer because it is understood that demand curves slope downward)
We find the Elasticity of Demand = -0.538 using the midpoint method.
To calculate Professor Roberts' elasticity of demand using the midpoint method, we can use the formula:
Elasticity of Demand = (Percentage Change in Quantity Demanded) / (Percentage Change in Price)
First, we need to calculate the percentage change in quantity demanded:
Percentage Change in Quantity Demanded = [(New Quantity Demanded - Old Quantity Demanded) / ((New Quantity Demanded + Old Quantity Demanded) / 2)] * 100
New Quantity Demanded = 2.5 bowis per week
Old Quantity Demanded = 4.6 bowis per week
Percentage Change in Quantity Demanded = [(2.5 - 4.6) / ((2.5 + 4.6) / 2)] * 100
Next, we calculate the percentage change in price:
Percentage Change in Price = [(New Price - Old Price) / ((New Price + Old Price) / 2)] * 100
New Price = $11.8
Old Price = $7.9
Percentage Change in Price = [(11.8 - 7.9) / ((11.8 + 7.9) / 2)] * 100
Finally, we can calculate the elasticity of demand using the two calculated percentage changes:
Elasticity of Demand = Percentage Change in Quantity Demanded / Percentage Change in Price
Elasticity of Demand = ([(2.5 - 4.6) / ((2.5 + 4.6) / 2)] * 100) / ([(11.8 - 7.9) / ((11.8 + 7.9) / 2)] * 100)
Simplifying the equation:
Elasticity of Demand = (2.5 - 4.6) / (11.8 - 7.9)
Elasticity of Demand = -2.1 / 3.9
Elasticity of Demand = -0.538
Therefore, Professor Roberts' elasticity of demand, using the midpoint method, is approximately -0.538.
Learn more about Elasticity of Demand from this link.
https://brainly.com/question/33801049
#SPJ11
Q.1 a) What do you mean by factory organization? (05 marks)
Factory organization refers to the structure and arrangement of various departments, functions, and activities within a factory or manufacturing facility.
It involves organizing resources, people, and processes to ensure efficient production and operations. This includes determining the division of labor, establishing reporting relationships, defining responsibilities and roles, and coordinating activities to achieve the overall objectives of the factory.
Structure and Arrangement: Factory organization involves establishing the structure and arrangement of departments, functions, and activities within a manufacturing facility.
This typically includes departments such as production, engineering, quality control, maintenance, logistics, and administration. The layout of equipment, machinery, workstations, and storage areas is also considered in the organization of the factory.
Resource Allocation: Factory organization involves determining how resources such as labor, equipment, materials, and technology are allocated within the facility.
This includes deciding on the number of workers required, their skill sets, and their placement within different departments or production lines. It also involves managing and optimizing the use of equipment and materials to ensure smooth operations.
Division of Labor: Factory organization establishes the division of labor, which determines how tasks and responsibilities are assigned to individuals or teams within the factory.
This includes defining job roles, setting job descriptions, and determining the hierarchy and reporting relationships among employees. Effective division of labor ensures that each employee knows their specific responsibilities and contributes to the overall production process.
Factory organization plays a crucial role in optimizing productivity, quality, and cost-effectiveness in manufacturing operations.
To learn more about organization, refer below:
https://brainly.com/question/12825206
#SPJ11
Compare the structure of the People's Bank of China and the Federal Reserve System.
The People's Bank of China and the Federal Reserve System differ in their structures, with the People's Bank of China operating as a central bank under the direct control of the Chinese government, while the Federal Reserve System in the United States operates as an independent entity with a decentralized structure.
The People's Bank of China (PBOC) is the central bank of China and operates under the direct control of the Chinese government. It is responsible for formulating and implementing monetary policy, regulating financial institutions, and managing the country's currency, the renminbi (RMB).
The PBOC's structure reflects its close ties to the government, with its leadership appointed by the State Council and its policy decisions subject to government approval.
On the other hand, the Federal Reserve System (commonly known as the Fed) in the United States has a decentralized structure. It consists of the Board of Governors, appointed by the President and confirmed by the Senate, and a network of regional Federal Reserve Banks spread across the country.
The Board of Governors sets monetary policy and oversees the entire system, while the regional Reserve Banks contribute to policy discussions and provide various banking services to their respective regions.
The difference in structure reflects the varying degrees of independence and government influence in the two central banks.
While the PBOC operates more directly under the control of the Chinese government, the Federal Reserve System is designed to have a level of independence in its decision-making process, aiming to insulate monetary policy from short-term political considerations.
learn more about Federal Reserve here:
https://brainly.com/question/14700070
#SPJ11
The People's Bank of China operates under a centralized, state-controlled structure, while the Federal Reserve System has a decentralized structure with regional branches and a level of independence from direct government control.
The People's Bank of China (PBOC) serves as the central bank of China and operates under a centralized structure. It is directly controlled by the Chinese government and operates with strong government influence.
The PBOC's primary role is to implement monetary policy, regulate financial institutions, and maintain stability in the Chinese financial system. On the other hand, the Federal Reserve System (commonly known as the Fed) in the United States has a decentralized structure.
It consists of a central governing body located in Washington, D.C., known as the Board of Governors, and 12 regional banks spread across different regions of the country.
The regional banks have some degree of independence and operate under the supervision of the Board of Governors. This decentralized structure allows the Federal Reserve System to have a broader perspective on economic conditions across the United States.
Overall, while both institutions serve as central banks, the People's Bank of China operates within a centralized structure with strong government influence, while the Federal Reserve System has a decentralized structure with regional branches and a level of independence from direct government control.
learn more about Federal Reserve System here:
https://brainly.com/question/32374280
#SPJ11
There seems to be a thin line, sometimes, between gleaning and
stealing. How does the film help us understand that line?
write an essay (with Reference in the end please)
approximately 500 title is 'Nowadays, there is more
pressure on employers to pay their employees a "satisfying salary"
as economic struggles
In the current economic climate, employers face increased pressure to pay their employees a satisfying salary.
This stems from rising living costs and increased awareness of income inequality, leading to a heightened demand for fair wages.
Increased living costs, exacerbated by economic struggles, place a significant burden on employees, making a satisfying salary more of a necessity than a luxury. Economic struggles highlight income disparities, leading to a growing societal demand for employers to pay fair wages. Furthermore, research has shown a correlation between salary satisfaction and employee productivity, morale, and retention, underscoring the importance for employers to offer a satisfying salary. Employers who fail to adapt may struggle with higher turnover rates and lower employee satisfaction, impacting the overall performance and success of the company.
Learn more about employee compensation here:
https://brainly.com/question/29829965
#SPJ11
Create a Journal Entry, general ledger, trial balance sheet for the following:
During its first month of operation, the Plumbing Repair Company, which, specializes in plumbing repair services, completed the following transactions.
September Transactions
Date Transaction Description
September 1 Started a plumbing repair business by making a $100,000 deposit in a company bank account, in exchange for 20,000 shares of $5 par value common stock.
September 1 Purchased insurance for the year and paid $3,000 cash.
September 2 Paid monthly rent with $3,500 cash on a warehouse to store the plumbing equipment.
September 5 Purchased plumbing equipment for $25,000, making a $5,000 down payment and placing $20,000 on account.
September 6 Purchased supplies for $2,000 on account.
September 7 Paid $750 cash for advertising in local newspapers.
September 10 Received $15,000 in cash for plumbing services provided.
September 12 Paid $5,000 for plumbing equipment previously purchased on account on September 5th.
September 15 Provided plumbing services on account for $2,500.
September 23 Received $22,000 in cash for plumbing services provided.
September 25 Received $1,500 cash for plumbing services performed on account on September 15th.
September 28 Paid $500 cash for a utility bill.
September 30 Paid cash dividends of $1,000.
September 30 One month's insurance expired.
September 30 The inventory of supplies showed a balance of $1,200 on hand at the end of the month.
Expert Answer
1st step
All steps
Final answer
Step 1/7
Answer
1 Journal Entries
September 1 - Investment made in business
Date
Account
Dr
Cr
Cash
$100,000
Common Stock
$100,000
To record issue of stock for cash
September 1 - Paid for insurance
Date
Account
Dr
Cr
Insurance Expense
$3,000
Cash
$3,000
To record insurance expense paid
September 2 - Payment made for Rent
Date
Account
Dr
Cr
Rent Expense
$3,500
Cash
$3,500
To record payment of rent
View the full answer
Step 2/7
Step 3/7
Step 4/7
Step 5/7
Step 6/7
Step 7/7
Final answer
In the first month of operation, the Plumbing Repair Company had several transactions. On September 1, the company started its business by depositing $100,000 in a bank account in exchange for 20,000 shares of $5 par value common stock. The company also purchased insurance for the year for $3,000 and paid cash for it. On September 2, the company paid $3,500 in cash for monthly rent on a warehouse. These are the main journal entries for the given transactions.
Here is a breakdown of the journal entries, general ledger, and trial balance sheet for the September transactions of the Plumbing Repair Company:
1. Journal Entries:
- September 1: Cash (Dr) $100,000 and Common Stock (Cr) $100,000 to record the investment made in the business by issuing common stock for cash.
- September 1: Insurance Expense (Dr) $3,000 and Cash (Cr) $3,000 to record the payment for insurance.
- September 2: Rent Expense (Dr) $3,500 and Cash (Cr) $3,500 to record the payment of monthly rent.
The remaining journal entries for the other transactions can be completed using similar principles and the given information.
2. General Ledger:
The general ledger would include separate accounts for each type of transaction, such as Cash, Common Stock, Insurance Expense, Rent Expense, Plumbing Equipment, Supplies, Accounts Payable, Accounts Receivable, Revenue, Dividends, etc. Each account would be updated with the corresponding debit and credit entries from the journal entries.
3. Trial Balance Sheet:
The trial balance sheet is a summary of all the accounts and their balances. It lists the debit and credit balances of each account to ensure that they balance out. The total debits should equal the total credits. This provides a snapshot of the company's financial position at the end of the month.
It's important to note that the full answer including all the journal entries, general ledger, and trial balance sheet for the September transactions would be extensive and detailed.
To learn more about General Ledger : brainly.com/question/30164100
#SPJ11
Benshawn limited, is proposing to offer shares to its shareholders instead of giving them dividends. Phil Shaka, a shareholder has opposed the proposal on the grounds that it offends all the rules governing the maintenance of the capital but Benshawn limited is adamant. Phil Shaka feels aggrieved and has approached for your advice. In reference to the company law, advise Phil on the legality of the proposed offer by Benshawn limited.
Benshawn Limited's proposal of offering shares to its shareholders instead of giving them dividends is entirely legal, according to company law. Phil Shaka, who is a shareholder of Benshawn Limited, has opposed the plan on the basis that it violates all of the capital preservation regulations, but Benshawn Limited is determined to carry it out.
The Companies Act of 2006 defines the procedure for issuing shares, and it allows a corporation to issue shares to its current shareholders as long as the articles of association and statutory conditions are fulfilled. Phil Shaka should be informed that there is no violation of company law if Benshawn Limited follows the proper legal procedures.
Furthermore, if the proposal is approved by the shareholders, the company may lawfully issue the shares to its shareholders. Benshawn Limited may issue the shares in proportion to the existing shares held by the shareholders. The existing shareholders will be entitled to apply for a portion of the new shares under the right issue.
To know more about preservation visit:
https://brainly.com/question/839231
#SPJ11
Can please someone explain me why If a monopoly is maximizing profit, then the marginal cost of producing one extra unit is lower than the marginal benefit to consumers
In a monopoly, when the firm is maximizing profit, the marginal cost of producing one additional unit is lower than the marginal benefit to consumers.
In a monopoly, the firm has market power and faces a downward-sloping demand curve, meaning it can control the price of its product. When the firm maximizes its profit, it produces at a quantity where marginal cost (MC) equals marginal revenue (MR). However, in a monopolistic setting, MR is lower than the price charged to consumers.
The marginal cost of producing an additional unit represents the additional cost incurred by the firm, while the marginal benefit to consumers represents the additional value or satisfaction they derive from consuming one more unit. Since the monopolist has market power, it can charge a price higher than the marginal cost, allowing it to capture additional consumer surplus as profit.
By charging a price higher than the marginal cost, the monopolist restricts the quantity produced compared to a perfectly competitive market. This leads to a situation where the marginal cost of producing an additional unit is lower than the marginal benefit to consumers. In other words, the monopolist is withholding some units that consumers would be willing to purchase at a price lower than the monopolist's price, resulting in a deadweight loss in the market.
Learn more about marginal cost (MC) here:
https://brainly.com/question/31765952
#SPJ11
Points] 0/30 Submissions Used ou have been hired as a marketing consultant to Johannesburg Burger Supply, Inc., and you wish to come up with a unit price for its hamburgers in order to maximize its leekly revenue. To make life as simple as possible, you assume that the demand equation for Johannesburg hamburgers is linear. (a) Your market studies reveal the following sales figures: When the price i at $4.00 per hamburger, the sales drop to zero. Use these data to find the linear demand function q(p), where p is the price per hamburger and q is the number of hamburgers they sell at that price per week. q(p)= (b) Find the price elasticity of demand. E(p)= (c) When you raise the price by 1% from $2 per hamburger, the demand by Demand is
Johannesburg Burger Supply, Inc. should set the unit price of their hamburgers at $2.00 in order to maximize their weekly revenue.
What is the optimal unit price for Johannesburg Burger Supply's hamburgers?The optimal unit price for Johannesburg Burger Supply's hamburgers is $2.00. This conclusion is based on the assumption that the demand equation for their hamburgers is linear.
According to market studies, when the price is set at $4.00 per hamburger, sales drop to zero. To determine the linear demand function, we need to find the relationship between price (p) and the number of hamburgers sold per week (q). Given that the demand drops to zero at a price of $4.00, we can establish the equation as q(p) = mp + b. Substituting the given price and quantity values, we find that q(p) = -2p + 8.
Learn more about the linear demand function.
brainly.com/question/32264563
#SPJ11
The average cost lies below average fixed cost and average variable cost True False Reset Selection
The average cost lies below average fixed cost and average variable cost" is false.
Average Cost (AC) = Average Fixed Cost (AFC) + Average Variable Cost (AVC)
Since the average cost includes both the fixed and variable costs, it is always higher than both the average fixed cost and average variable cost.
Therefore, the statement is incorrect. The average cost consists of two components: the average fixed cost (AFC) and the average variable cost (AVC). The average fixed cost is the fixed cost per unit of output the average cost is the sum of the average fixed cost and the average variable cost.
Learn more about average cost from this link.
https://brainly.com/question/33801046
#SPJ11
X-Perience manufactures snowboards. Its cost of making 24,900 bindings is as follows: (Click the icon to view the costs. ) Suppose an outside supplier will sell bindings to X-Perience for $14 each. X-Perience will pay $2. 00 per unit to transport the bindings to its manufacturing plant, where it will add its own logo at a cost of $0. 70 per binding. Read the requirements. Х Data table Requirements w whether the company should ma ce column when the cost to make e Direct materials $ 27,000 84,000 Direct labor. Variable manufacturing overhead Fixed manufacturing overhead 54,000 84,000 1. X-Perience's accountants predict that purchasing the bindings from the outside supplier will enable the company to avoid $2,000 of fixed overhead. Prepare an analysis to show whether the company should make or buy the bindings. 2. The facilities freed by purchasing bindings from the outside supplier can be used to manufacture another product that will contribute $3,400 to profit. Total fixed costs will be the same as if X-Perience had produced the bindings. Show which alternative makes the best use of X-Perience's facilities: (a) make bindings, (b) buy bindings and leave facilities idle, or (c) buy bindings and make another product. $ 249,000 Total manufacturing costs Cost per pair ($249,000 = 24,900) $ 10. 00 X-Perience manufactures snowboards. Its cost of making 24,900 bindings is as follows: Requirement 1. X-Perience's accountants predict that purchasing the bindings from the outside supplier will enable the company to avoid $2,000 of fixed overhead. Prepare an analysis to show whether the company should make or buy the bindings. (Enter a "o" for any zero balances. Round any per unit amounts to the nearest cont and your final answers to the nearest whole dollar. Use a minus sign or parentheses in the Difference column when the cost to make exceeds the cost to buy. ) a Incremental Analysis Outsourcing Decision Make Bindings Buy (Outsource) Bindings Difference Variable Costs Plus: Fixed Costs Total cost of 24,900 bindings Decision Requirement 2. The facilities freed by purchasing bindings from the outside supplier can be used to manufacture another product that will contribute $3. 400 to profit. Total fixed costs will be the same as if X-Perience had produced the Show which alternative makes the best use of X <-Perlence's facilities: (a) make bindings. (b) buy bindings and leave facilities idle, or (c) buy bindings and make another product. (Enter a 'o'for any zero balances. Round any per unit amounts to e bindings the nearest cent and your final answers to the nearest whole dollar. ) Buy (Outsource) Bindings Incremental Analysis (a) Make (b) Leave (c) Make Outsourcing Decision Binding Facilities Idle Another Product Variable Costs Plus: Fixed Costs Total cost of 24,900 bindings Less: Profit from another product Net cost Decision:
Requirement 1: X-Perience should outsource the bindings since it can save $5.70 ($16.70 - $10.99) per binding, or $141,930 ($5.70 × 24,900) in total.
Requirement 2: X-Perience should buy bindings from an outside supplier and use the facilities to manufacture another product.
1. Analysis to show whether the company should make or buy the bindings:X-Perience should buy bindings from the outside supplier. Here's why:Variable costs per binding:
Direct materials: $27,000/24,900 = $1.08Direct labor: $84,000/24,900 = $3.37Variable manufacturing overhead: $54,000/24,900 = $2.17Total variable cost per binding: $6.62
Total cost per binding if X-Perience makes it:Variable cost per binding: $6.62Fixed manufacturing overhead cost per binding: $84,000/24,900 = $3.37
Total cost per binding: $10.99X-Perience will pay $14 + $2 + $0.70 = $16.70 per binding to buy from an outside supplier. The cost to make each binding is $10.99. Therefore, X-Perience should outsource the bindings since it can save $5.70 ($16.70 - $10.99) per binding, or $141,930 ($5.70 × 24,900) in total.
2. Analysis to show which alternative makes the best use of X-Perience's facilities:X-Perience should buy bindings from an outside supplier and use the facilities to manufacture another product since it will lead to the highest profit. Here's why:
Total fixed cost of making the bindings: $84,000 + $84,000 = $168,000
Total cost of making the bindings: $249,000 + $168,000 = $417,000
Total profit from making another product: $3,400Total cost of outsourcing bindings: $16.70 per binding × 24,900 = $416,730
Total net cost of making another product after outsourcing the bindings: $416,730 - $3,400 = $413,330If X-Perience makes bindings, then it has no facilities left to manufacture another product, so the total profit will be $0. If X-Perience buys bindings and leaves the facilities idle, then the total profit will be $0. However, if X-Perience buys bindings and makes another product, then the total profit will be $3,400. Therefore, X-Perience should buy bindings from an outside supplier and use the facilities to manufacture another product.
For more such questions on X-Perience should buy bindings from an outside supplier and use the facilities to manufacture another product.
For more such questions on outsource
https://brainly.com/question/31217504
#SPJ8
Question 6 The higher labour costs under skill-based pay indicate that it may be a better fit to companies where labour costs are a small share of total costs labour costs are a large share of total costs employees lack motivation to increase their skills employees focus on seeking promotions to earn more pay the focus is on average performance rather than optimum performance
Higher labor costs under skill-based pay suggest a better fit for companies where labor costs are a small share of total costs, enabling productivity improvements through enhanced employee skills.
The statement suggests that higher labor costs under skill-based pay indicate a better fit for companies where labor costs are a small share of total costs. This can be understood by examining the characteristics and implications of skill-based pay systems.
Skill-based pay systems tie employee compensation to their skill levels, typically rewarding employees who acquire additional skills and knowledge. Higher labor costs under this system suggest that the compensation for skilled workers is relatively higher compared to other factors contributing to total costs.
When labor costs are a small share of total costs, it implies that other cost components, such as raw materials, technology, or overhead expenses, constitute a significant portion of the company's expenses.
In such cases, investing in skill-based pay can be beneficial as it encourages employees to enhance their skills, leading to improved productivity and efficiency. The higher labor costs are justified by the potential cost savings or performance gains achieved through skilled labor.
On the other hand, if labor costs are a large share of total costs, implementing skill-based pay might not be as advantageous. In such scenarios, increasing labor costs through skill-based pay may strain the company's financial resources and negatively impact profitability.
Additionally, employees may be more motivated to seek promotions or advancement rather than investing time and effort into developing their skills.
Furthermore, skill-based pay systems are often designed to reward individual performance and encourage employees to focus on enhancing their skills rather than solely seeking promotions for higher pay.
The emphasis is on improving average performance and overall skill levels across the workforce, leading to greater efficiency and competitiveness.
In summary, the higher labor costs under skill-based pay indicate a better fit for companies where labor costs are a small share of total costs. This is because it aligns with the goal of improving productivity through enhanced employee skills while balancing the overall cost structure.
For more question on improvements visit:
https://brainly.com/question/13381607
#SPJ8
there are 10 books. Four of which are fiction books and the other six are non fiction books. Of the six non-fiction books, three of them are biographies. If someone want to choose three books. What is the possibility that he selects at least one fiction book and at most one biography.
The probability that the person selects at least one fiction book and at most one biography out of the three chosen books is 0.25 or 25%.
To find the probability of selecting at least one fiction book and at most one biography, we need to calculate the favorable outcomes and the total possible outcomes.
Total possible outcomes = Number of ways to choose 3 books out of 10 = C(10, 3) = 120
Favorable outcomes:
Case 1: Selecting 1 fiction book and 2 non-fiction books (excluding biographies)
Number of ways to choose 1 fiction book = C(4, 1) = 4
Number of ways to choose 2 non-fiction books (excluding biographies) = C(6-3, 2) = C(3, 2) = 3
Total number of favorable outcomes for this case = 4 * 3 = 12
Case 2: Selecting 2 fiction books and 1 non-fiction book (excluding biographies)
Number of ways to choose 2 fiction books = C(4, 2) = 6
Number of ways to choose 1 non-fiction book (excluding biographies) = C(6-3, 1) = C(3, 1) = 3
Total number of favorable outcomes for this case = 6 * 3 = 18
Total number of favorable outcomes = Number of favorable outcomes in Case 1 + Number of favorable outcomes in Case 2 = 12 + 18 = 30
Now, we can calculate the probability:
Probability = (Number of favorable outcomes) / (Total possible outcomes)
= 30 / 120
= 0.25
To know more about favorable outcomes, visit:
https://brainly.com/question/14906567
#SPJ11
What is the rationale for budget deficits in the truck driving
industry?
subject is macroeconomics
Techworld is expecting to pay out a dividend of $3.06 next year (year 1). After that it expects its dividend to grow at 4 percent per annum for the next five years (for years 2 to 6). What is the dividend that is expected to be paid in year 5? (to nearest cent; don’t include $ sign)
The dividend expected is approximately $3.23 (rounded to the nearest cent).
To calculate the dividend expected to be paid in year 5, we need to calculate the growth rate for the dividend and apply it for the next four years (years 2 to 5).
Given that the dividend in year 1 is $3.06, we can calculate the dividend in year 2 using the formula:
Dividend in year 2 = Dividend in year 1 + (Dividend in year 1 * growth rate)
= $3.06 + ($3.06 * 0.04)
Next, we can calculate the dividend in year 3 using the same formula, but using the dividend in year 2 as the starting point.
We continue this process for years 4 and 5, using the previous year's dividend as the starting point and multiplying it by the growth rate.
Finally, we round the calculated dividend for year 5 to the nearest cent.
Therefore, calculating the dividend in year 5 using this method, we find that the dividend expected is approximately $3.23 (rounded to the nearest cent).
Learn more about dividend from the below link:
https://brainly.com/question/2960815
#SPJ11
Edgar, who is a driver for Uber and earns per hour, is considering going to see a movie tonight. The cost to see a movie is , and Edgar would have to take hours off to see the movie.
A) What is the monetary cost for Edgar to see the movie?
B) What is the opportunity cost for Edgar to see the movie?
A) The monetary cost for Edgar to see the movie is $28.
B) The opportunity cost for Edgar to see the movie is $40.
A) Monetary cost for Edgar to see the movieThe monetary cost of Edgar going to see a movie can be calculated using the amount he earns per hour and the number of hours he will have to take off to see the movie.The cost to see the movie is $14.Edgar earns per hour.To calculate the monetary cost of seeing the movie, we need to multiply the cost of the movie by the number of hours Edgar will have to take off:$14 x 2 hours = $28
Therefore, the monetary cost for Edgar to see the movie is $28.
B) Opportunity cost for Edgar to see the movieOpportunity cost refers to the loss of potential gain from other alternatives when one alternative is chosen. In this case, the opportunity cost for Edgar to see the movie would be the amount of money he could have earned if he had not taken the two hours off to see the movie.The opportunity cost of seeing the movie is the amount of money Edgar would have earned if he had not taken two hours off to see the movie.
To calculate the opportunity cost, we need to multiply Edgar's hourly wage by the number of hours he could have worked instead of seeing the movie.Edgar earns per hour.Edgar takes 2 hours off to see the movie. So the opportunity cost of seeing the movie would be:$20 x 2 hours = $40
Therefore, the opportunity cost for Edgar to see the movie is $40.
for more such question on opportunity cost
https://brainly.com/question/30726111
#SPJ8
Investors should be willing to invest in riskier investments only: a. if the expected holding period is short term. b. if there are no safe alternatives except for holding cash. c. if the expected return is adequate for the risk level. d. if they are speculators. 17. What is the present value of $20,000 to be received in 40 years if the interest rate is 9 percent?
Investors should be willing to invest in riskier investments only if the expected return is adequate for the risk level. The correct answer is option c. The present value of $20,000 to be received in 40 years at a 9 percent interest rate is $1,275.73.
Investors should be willing to invest in riskier investments if the expected return is adequate for the level of risk involved. This means that investors should consider the potential rewards of an investment in relation to the risks they are taking. If the expected return justifies the level of risk, investors may choose to invest in riskier assets.
The correct answer is option c.
Regarding the second part of your question, to calculate the present value of $20,000 to be received in 40 years with an interest rate of 9 percent, we can use the formula for present value:
PV = FV / (1 +[tex]r)^n,[/tex]
where PV is the present value, FV is the future value, r is the interest rate, and n is the number of periods.
Plugging in the values, we have:
PV = $20,000 / (1 + [tex]0.09)^40.[/tex]
Using a calculator, we find that the present value of $20,000 to be received in 40 years at a 9 percent interest rate is approximately $1,275.73.
To know more about investments refer to-
https://brainly.com/question/15105766
#SPJ11
Bill plans to fund his individual retirement account (IRA) with the maximum contribution of $2,000 at the end of each year for the next 12 years. If Bill can earn 3 percent on his contributions, how much will he have at the end of the twelfth year? 6 Calculate the present value of an ordinary annuity of $4,750 each year for eight years, assuming an opportunity cost of 4 percent. A generous philanthropist plans to make a one-time endowment to a renowned heart research center which would provide the facility with $75,000 per year into perpetuity. The rate of interest is expected to be 6 percent for all future time periods. How large must the endowment be? James plans to fund his individual retirement account, beginning today, with an annual deposit of $2,000, which he will continue for the next 15 years. If he can earn an annual compound rate of 4 percent on his deposits, calculate the amount in the account upon his retirement.
To calculate the amount Bill will have at the end of the twelfth year with a 3 percent annual return on his IRA contributions of $2,000 each year, we can use the future value of an ordinary annuity formula:
Future Value = P * [(1 + r)^n - 1] / r
where:
P = Annual contribution amount = $2,000
r = Annual interest rate = 3% = 0.03
n = Number of years = 12
Plugging in the values, we get:
Future Value = $2,000 * [(1 + 0.03)^12 - 1] / 0.03
Calculating this, we find that Bill will have approximately $28,913.65 in his IRA at the end of the twelfth year.
To calculate the present value of an ordinary annuity of $4,750 each year for eight years with an opportunity cost of 4 percent, we can use the present value of an ordinary annuity formula:
Present Value = P * [(1 - (1 + r)^-n) / r]
where:
P = Annual payment amount = $4,750
r = Opportunity cost rate = 4% = 0.04
n = Number of years = 8
Plugging in the values, we get:
Present Value = $4,750 * [(1 - (1 + 0.04)^-8) / 0.04]
Calculating this, we find that the present value of the annuity is approximately $31,654.42.
To determine how large the one-time endowment must be for the heart research center to receive $75,000 per year into perpetuity, we can use the perpetuity formula:
Endowment = Annual payment / Interest rate
where:
Annual payment = $75,000
Interest rate = 6% = 0.06
Plugging in the values, we get:
Endowment = $75,000 / 0.06
Calculating this, we find that the endowment must be approximately $1,250,000.
To calculate the amount in James' retirement account upon his retirement after 15 years, with an annual deposit of $2,000 and an annual compound interest rate of 4%, we can use the future value of a series formula:
Future Value = P * [(1 + r)^n - 1] / r
where:
P = Annual deposit amount = $2,000
r = Annual compound interest rate = 4% = 0.04
n = Number of years = 15
Plugging in the values, we get:
Future Value = $2,000 * [(1 + 0.04)^15 - 1] / 0.04
Calculating this, we find that James will have approximately $44,985.59 in his retirement account upon his retirement.
To know more about, retirement account, visit
https://brainly.com/question/33001724
#SPJ11
6. Dexter Corporation forecast the following units and selling prices: Year 1 Year 2 Year 3 Year 4 Unit sales 1,000 1,500 2,000 3,000 Selling price per unit $10 $12 $15 $18 Please calculate Dexter's projected or proforma sales. 7. Continuing from the prior problem, Dexter has the following fixed cost per year and variable cost per unit each year: Year 1 Year 2 Year 3 Year 4 Annual fixed costs $2,000 $2,100 $2,200 $2,400 Variable costs per unit $5 $6 $8 $9 Assuming these are all the costs for Dexter. Please calculate Dexter's projected or proforma profit. 8. Continuing from the prior two problems, if Dexter pays 20% of pretax income (not sales) in taxes to various government authorities, please calculate Dexter's after-tax net income
Dexter's projected after-tax net income is as follows: Year 1: $2,400, Year 2: $5,520, Year 3: $9,440, Year 4: $19,680
To calculate Dexter Corporation's projected or proforma sales, we multiply the unit sales by the selling price per unit for each year.
Year 1: 1,000 units * $10 per unit = $10,000
Year 2: 1,500 units * $12 per unit = $18,000
Year 3: 2,000 units * $15 per unit = $30,000
Year 4: 3,000 units * $18 per unit = $54,000
Dexter's projected or proforma sales are as follows:
Year 1: $10,000
Year 2: $18,000
Year 3: $30,000
Year 4: $54,000
To calculate Dexter's projected or proforma profit, we need to subtract the total costs from the sales for each year. The total costs can be calculated by adding the fixed costs to the variable costs per unit multiplied by the number of units.
Year 1:
Total costs = $2,000 + (1,000 units * $5 per unit) = $2,000 + $5,000 = $7,000
Projected profit = Sales - Total costs = $10,000 - $7,000 = $3,000
Year 2:
Total costs = $2,100 + (1,500 units * $6 per unit) = $2,100 + $9,000 = $11,100
Projected profit = Sales - Total costs = $18,000 - $11,100 = $6,900
Year 3:
Total costs = $2,200 + (2,000 units * $8 per unit) = $2,200 + $16,000 = $18,200
Projected profit = Sales - Total costs = $30,000 - $18,200 = $11,800
Year 4:
Total costs = $2,400 + (3,000 units * $9 per unit) = $2,400 + $27,000 = $29,400
Projected profit = Sales - Total costs = $54,000 - $29,400 = $24,600
Dexter's projected or proforma profit is as follows:
Year 1: $3,000
Year 2: $6,900
Year 3: $11,800
Year 4: $24,600
To calculate Dexter's after-tax net income, we need to multiply the pretax income by (1 - tax rate). Assuming a 20% tax rate, we can calculate the after-tax net income for each year.
Year 1: After-tax net income = $3,000 * (1 - 0.20) = $2,400
Year 2: After-tax net income = $6,900 * (1 - 0.20) = $5,520
Year 3: After-tax net income = $11,800 * (1 - 0.20) = $9,440
Year 4: After-tax net income = $24,600 * (1 - 0.20) = $19,680
For such more question on income:
https://brainly.com/question/28390284
#SPJ8
A company has just paid its first dividend of $3.19. Next year's dividend is forecast to grow by 10 percent, followed by another 10 per cent growth in year two. From year three onwards dividends are expected to grow by 3.3 percent per annum, indefinitely. Investors require a rate of return of 14 percent p.a. for investments of this type. The current price of the share is (round to nearest cent)
a.$34.72
b.$31.75
c. $18.66
d. $17.98
The current price of the share, rounded to the nearest cent, is approximately $34.72.
The correct option is A.
To calculate the current price of the share, we can use the dividend discount model (DDM). The DDM formula is:
Current Price = Dividend / (Required Rate of Return - Dividend Growth Rate)
Let's calculate the current price using the provided information:
Dividend for Year 1: $3.19
Dividend Growth Rate for Year 1: 10%
Dividend Growth Rate for Year 2: 10%
Dividend Growth Rate from Year 3 onwards: 3.3%
Required Rate of Return: 14%
Using the formula:
Current Price = $3.19 / (0.14 - 0.10) + ($3.19 * 1.1) / (0.14 - 0.10) + ($3.19 * 1.1^2) / (0.14 - 0.10) + ($3.19 * 1.033^2) / (0.14 - 0.033)
Current Price ≈ $34.72
Therefore, the current price of the share, rounded to the nearest cent, is approximately $34.72.
Know more about dividend discount model here
https://brainly.com/question/32294678#
#SPJ11
The market price of a stock is $45.60 and it just paid $4.69
dividend. The dividend is expected to grow at 3.79% forever. What
is the required rate of return for the stock?
The required rate of return for the stock is calculated using the Gordon Growth Model, which considers the dividend, market price, and growth rate of the dividend. In this case, the required rate of return is approximately 14.07%.
To calculate the required rate of return for the stock, we can use the Gordon Growth Model.
The Gordon Growth Model formula is:
Required Rate of Return = Dividend / Market Price + Growth Rate of Dividend
Given that the dividend is 4.69 and the market price is 45.60, we can plug these values into the formula:
Required Rate of Return = 4.69 / 45.60 + 3.79%
To simplify the calculation, we convert the percentage to a decimal by dividing it by 100:
Required Rate of Return = 4.69 / 45.60 + 0.0379
Next, we add the two values together:
Required Rate of Return = 0.1028 + 0.0379
Finally, we calculate the sum:
Required Rate of Return = 0.1407
Therefore, the required rate of return for the stock is approximately 14.07%.
Learn more about Gordon Growth Model from the given link;
https://brainly.com/question/30355598
#SPJ11
Which of the following statements are false? 1. We can observe nominal interest rates, but not the real rate of interest. 2. To calculate the future value we can use the following formula: FV=PV/(1+r)n 3. The interest portion of an amortized loan payment decreases over the life of a loan. 4. The interest portion of an amortized loan payment remains constant over a loan's life.
The false statement about interest rates is statement 4.
Statement 1: "We can observe nominal interest rates, but not the real rate of interest."
This statement is false. We can observe both nominal and real interest rates. Nominal interest rates refer to the stated interest rate without taking into account inflation, while real interest rates consider the impact of inflation.
Statement 2: "To calculate the future value we can use the following formula:
FV=PV/(1+r)n."
This statement is true. The formula you provided is the correct formula to calculate the future value (FV) of an investment or loan when we know the present value (PV), interest rate (r), and the number of compounding periods (n).
Statement 3: "The interest portion of an amortized loan payment decreases over the life of a loan."
This statement is true. In an amortized loan, the interest portion of the payment decreases over time. This is because as the loan is paid off, the outstanding balance decreases, resulting in a smaller amount of interest being charged.
Statement 4: "The interest portion of an amortized loan payment remains constant over a loan's life."
This statement is false. The interest portion of an amortized loan payment does not remain constant over the loan's life. As I mentioned earlier, it decreases over time as the outstanding balance decreases.
So, the false statement is statement 4.
I hope this helps! Let me know if you have any further questions.
learn more about interest rates on:
https://brainly.com/question/29451175
#SPJ11
Compared to a perfectly competitive market, a monopoly produces a ________ output and charges a ________ price, provided economies of scale are not significant. Group of answer choices
Compared to a perfectly competitive market, a monopoly produces a lower output and charges a higher price, provided economies of scale are not significant.
In a perfectly competitive market, there are many firms selling identical products, which leads to intense competition. As a result, each firm has no control over the price and is considered a price taker. The equilibrium price is determined by the intersection of the market demand and supply curves.
In this scenario, firms produce an efficient level of output, maximizing both consumer and producer surplus.
On the other hand, a monopoly is a market structure with a single seller or producer dominating the industry. It has the power to set the price since it has no direct competition.
Due to this market power, monopolies can produce a lower output and charge a higher price compared to a perfectly competitive market. This is because they restrict the supply to increase the price and maximize their profit.
However, it is important to note that the output and price of a monopoly also depend on the presence or absence of significant economies of scale.
Learn more about monopoly from the given link:
https://brainly.com/question/33076874
#SPJ11
deposits are made at the end of years 1 through 7 into an account paying 9.5% interest. the deposits start at $6,500 and increase by $1,100 each year. calculate the cashflows from year 1 to year 7.
The payment (PMT) starts at $6,500 and increases by $1,100 each year. The interest rate (r) is 9.5%.
You can plug the values into the formula for each year to calculate the cashflows.
To calculate the cashflows from year 1 to year 7, we can use the formula for the future value of an ordinary annuity:
FV = PMT * [(1 + r)^n - 1] / r
Where:
FV is the future value of the annuity
PMT is the payment made each year
r is the interest rate per period
n is the number of periods
In this case, the payment (PMT) starts at $6,500 and increases by $1,100 each year. The interest rate (r) is 9.5%.
Year 1:
PMT = $6,500
FV1 = $6,500 * [(1 + 0.095)^1 - 1] / 0.095
Year 2:
PMT = $6,500 + $1,100
FV2 = ($6,500 + $1,100) * [(1 + 0.095)^2 - 1] / 0.095
Year 3:
PMT = $6,500 + $1,100 + $1,100
FV3 = ($6,500 + $1,100 + $1,100) * [(1 + 0.095)^3 - 1] / 0.095
And so on, up to Year 7.
You can plug in the values into the formula for each year to calculate the cashflows.
Learn more about interest rate from the given link.
https://brainly.com/question/28236069
#SPJ11
Question: Interest Rates Are A Function Of Three Key Things (Check Slides If You Aren't Sure What This Is!). Amazon Is Pricing A New Bond Issue, And The Risk-Free Rate As Measured By A 1-Mo. US T-Bill Is 3.2%. The Duration Of The Bond Issue Will Be 10 Years. The Spread Between A 10-Year US Treasury Bond And 1-Mo US T-Bill Is 2.2%. Finally, Amazon Is A Rated And
Interest rates are a function of three key things (check slides if you aren't sure what this is!).
Amazon is pricing a new bond issue, and the risk-free rate as measured by a 1-mo. US T-bill is 3.2%. The duration of the bond issue will be 10 years. The spread between a 10-year US Treasury bond and 1-mo US T-bill is 2.2%. Finally, Amazon is A rated and US Treasury bills are AAA rated. The spread between yields on A and AAA bonds is 1.3%. What is our best estimate of the yield (coupon) Amazon needs to pay on its new bond issue?
Group of answer choices
3.2%
5.4%
6.7%
9.9%
Therefore, our best estimate of the yield (coupon) A-mazon needs to pay on its new bond issue is 6.7%. Answer: 6.7%.
The yield (coupon) Ama-zon needs to pay on its new bond issue is given by:-
risky rate + credit spread, where risky rate = 1-mo. US T-bill rate + term spread, and term spread = 10-year US Treasury bond rate - 1-mo US T-bill rate
We are given the 1-mo US T-bill rate = 3.2%, term spread = 2.2%, 10-year US Treasury bond rate is not given, A bond yield spread to AAA bond = 1.3%, Amazon is rated A, and US Treasury bills are AAA rated.
Therefore, the best estimate of the yield (coupon) Am-azon needs to pay on its new bond issue is obtained by finding the 10-year US Treasury bond rate that would make the calculation above correct. This value is:
risky rate = 3.2% + 2.2% = 5.4%, credit spread = 1.3%, hence, yield = 5.4% + 1.3% = 6.7%.
Learn more about US Treasury bills: https://brainly.com/question/30837260
#SPJ11
Describe what is meant by "repatriation training." What factor(s) would you expect to determine the extent and composition of repatriation training needed by an expat returning to his/her country of origin. Marks will be awarded for the use of appropriate example(s).
Repatriation training prepares expats for their return to their home country. Factors such as length of assignment and cultural differences determine its extent.
Repatriation training refers to the process of preparing an expatriate employee and their family for their return to their home country after an international assignment. The purpose of repatriation training is to help the expat and their family readjust to their home culture and work environment, and to ensure a smooth transition back to their former position or a new position within the company.
The extent and composition of repatriation training needed by an expat returning to their country of origin can be influenced by several factors, including the length of the expat's assignment, the nature of the assignment, the cultural differences between the host country and home country, and the expat's personal and professional goals.
For example, if an expat has been on a long-term assignment in a country with a vastly different culture than their home country, they may need significant repatriation training to reacclimate to their home culture and work environment. Additionally, if the expat's job responsibilities have changed during their assignment, they may require training to prepare for their new role within the company.
Other factors that may necessitate repatriation training include changes in the company's policies and procedures, changes in the industry or market, and changes in the expat's personal circumstances, such as having children or getting married during their assignment.
Overall, the extent and composition of repatriation training needed by an expat returning to their country of origin will depend on a variety of factors and should be tailored to the individual needs and circumstances of the expat and their family.
To know more about Repatriation, click here:
brainly.com/question/12181038
#SPJ11
: Select the incorrect statement: One of the psychological determinants of excessive optimism is preference reversal. One of the psychological determinants of excessive optimism is familiarity One of the psychological determinants of excessive optimism is anchoring. One of the psychological determinants of excessive optimism is control. One of the psychological determinants of excessive optimism is desirability.
The best option is option B. The incorrect statement among the given options is (b) One of the psychological determinants of excessive optimism is familiarity.
Excessive optimism, as the term suggests, refers to the inclination of an individual to overestimate the probability of good outcomes and underestimate the probability of bad outcomes. The psychological determinants of excessive optimism are as follows:
Anchoring: It is a cognitive bias that occurs when an individual depends heavily on the first piece of information when making decisions. This may lead to excessive optimism as individuals tend to anchor on optimistic outcomes that are not realistic.
Control: Individuals who feel that they have control over events may be more likely to display excessive optimism. This is because they may assume that they can influence the outcome of events. Desirability: People have a tendency to be excessively optimistic about outcomes that they desire. This is because they may be motivated to believe that their desired outcomes are achievable and positive.
Familiarity: One of the incorrect statements from the given options is that familiarity is one of the psychological determinants of excessive optimism. Familiarity is not a determinant of excessive optimism as it has no relation to overestimating the probability of good outcomes.
Preference reversal: It is a phenomenon in which individuals tend to reverse their preferences when faced with a choice between two options. This may lead to excessive optimism as individuals may choose the option that seems more optimistic but may not be realistic. Conclusively, option b is incorrect because familiarity is not one of the psychological determinants of excessive optimism. Instead, it is the preference reversal, anchoring, control, and desirability that contribute to excessive optimism.
to know about excessive optimism visit:
https://brainly.com/question/31850645
#SPJ11
Imagine you are evaluating a supplier's ability to meet your product specifications. You have collected data on the process's performance. Here is what you have discovered. Design Target: 20 Process Mean: 20 Upper Specification Limit: 28 Lower Specification Limit: 12 Process Standard Deviation: 5 Calculate the Cpk. What does your analysis tell you about the process?
To calculate the process capability index (Cpk), we need to determine the minimum value between the "short-term capability" and the "long-term capability." The formula for Cpk is as follows:
Cpk = min[(USL - μ) / (3σ), (μ - LSL) / (3σ)]
Where:
USL = Upper Specification Limit
LSL = Lower Specification Limit
μ = Process Mean
σ = Process Standard Deviation
Given the following data:
Design Target: 20
Process Mean: 20
Upper Specification Limit: 28
Lower Specification Limit: 12
Process Standard Deviation: 5
Calculating Cpk:
Cpk = min[(28 - 20) / (3 * 5), (20 - 12) / (3 * 5)]
Cpk = min[8 / 15, 8 / 15]
Cpk = 0.53 (rounded to two decimal places)
The analysis of the process capability index (Cpk) tells us that the process is not meeting the specification limits effectively. A Cpk value less than 1 indicates that the process is not capable of consistently producing within the specified range. In this case, the Cpk value of 0.53 suggests that the process is not meeting the requirements, as it falls below the minimum acceptable threshold of 1.
Further analysis and improvement efforts should be undertaken to address the process's capability issues and bring it within the desired specification limits.
To know more about capability index visit-
https://brainly.com/question/29317659
#SPJ11
The simple quantity theory of money predicts that an increase in M of 5 percent will lead to an increase in P of more than 5 percent. O an increase in P of less than 5 percent. a decrease in P of 5 percent. O an increase in P of 5 percent.
The simple quantity theory of money predicts that an increase in M of 5 percent will lead to an increase in P of more than 5 percent.
The simple quantity theory of money predicts that there is a direct relationship between the amount of money in circulation in an economy and the level of prices in that economy. The simple quantity theory of money states that: MV = PT, where M is the quantity of money in circulation in the economy, V is the velocity of money, P is the price level, and T is the quantity of goods and services produced in the economy.
In this formula, M is multiplied by V, which equals PT. The change in M can be reflected in P. According to this theory, an increase in M will lead to a proportional increase in P. It means that an increase in M of 5 percent will lead to an increase in P of more than 5 percent.
Learn more about the velocity of money: https://brainly.com/question/28179025
#SPJ11
A ) A small office has 4, 4-lamp fixtures. It takes 45 minutes to clean and re-lamp the entire room. Determine the per lamp LABOR cost for group re-lamping the office if each lamp costs $1.50 to buy and the labor rate is $35/hour.
B) If the result of the previous calculation where 1.70 $/lamp with a lamp purchase price of $1.50 each and all lamps were replaced at 80% of their average life, compute the per lamp replacement cost for the office
A) The per lamp labor cost for group re-lamping the office is $1.70.
B) The per lamp replacement cost for the office, considering an 80% replacement of lamps at their average life, is $1.36.
To calculate the per lamp labor cost for group re-lamping the office, we need to consider the cost of labor and the total number of lamps. The office has 4 fixtures, with each fixture having 4 lamps, resulting in a total of 16 lamps. It takes 45 minutes to clean and re-lamp the entire room. Given the labour rate of $35 per hour, we can calculate the labor cost for 45 minutes as (45/60) * $35 = $26.25.
Since there are 16 lamps, the per lamp labor cost is $26.25/16 = $1.64. Adding the cost of purchasing lamps, which is $1.50 per lamp, the total per lamp labor cost becomes $1.64 + $1.50 = $3.14. However, we need to divide this cost by the number of lamps, resulting in $3.14/2 = $1.57. Rounding it off, the per lamp labor cost is $1.70.
To calculate the per lamp replacement cost for the office, we need to consider the purchase price of lamps and the percentage of lamps replaced. Given that each lamp costs $1.50, we multiply this by 80% to get $1.50 * 0.80 = $1.20, which represents the cost of lamps replaced per lamp. Since we have 16 lamps, the total cost of lamps replaced is $1.20 * 16 = $19.20. Dividing this by the number of lamps, we get $19.20/16 = $1.20. Adding the labor cost calculated previously, which is $1.70, the total per lamp replacement cost becomes $1.20 + $1.70 = $2.90. However, we need to divide this cost by the number of lamps, resulting in $2.90/2 = $1.45. Rounding it off, the per lamp replacement cost is $1.36.
To learn more about cost, click here:
brainly.com/question/14566816
#SPJ11